For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pushing on the exit of turns

Discussion in 'RC10 / B2 / B3 / B4.x / B5 / B5M / B6 / B6D' started by Gundevil-81, Jun 5, 2012.

  1. Gundevil-81

    Gundevil-81 Member

    Joined:
    Jun 5, 2012
    Messages:
    16
    Likes Received:
    8
    What are some of the things I can do to my b4.1 worlds to correct this? It has the box stock setup on it right now. Anyhelp would be greatly apprectiated.
     
  2. tmail61

    tmail61 Well-Known Member Factory Member

    Joined:
    Jun 1, 2012
    Messages:
    4,436
    Likes Received:
    911
    Start at "A" and work your way down the list one at a time.

    ===

    UNDER-STEER ON CORNER EXIT.
    A/ Soften front springs.
    B/ Harden rear springs.
    C/ Increase caster.
    D/ Decrease rear toe-in.
    E/ Lower front ride height.
    F/ Raise rear ride height.
    G/ Decrease rear wing angle.
    H/ Decrease anti-squat, this will increase some throttle traction.
     
  3. Gundevil-81

    Gundevil-81 Member

    Joined:
    Jun 5, 2012
    Messages:
    16
    Likes Received:
    8
    ok, will do and thank you very much.
     
  4. AERacer

    AERacer Administrator Staff Member Moderator Factory Member

    Joined:
    May 30, 2012
    Messages:
    9,341
    Likes Received:
    2,042
    Also use the foam spacers to move your battery pack forward
     
  5. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    OR you can always add some lead under the servo..
     
  6. Gundevil-81

    Gundevil-81 Member

    Joined:
    Jun 5, 2012
    Messages:
    16
    Likes Received:
    8
    I acually had the battery towards the front and it nose dived off of every jump, so I moved it towards the back. I will try the middle and see if that helps as well. Thanks for the tips.
     
  7. tmail61

    tmail61 Well-Known Member Factory Member

    Joined:
    Jun 1, 2012
    Messages:
    4,436
    Likes Received:
    911
  8. Gundevil-81

    Gundevil-81 Member

    Joined:
    Jun 5, 2012
    Messages:
    16
    Likes Received:
    8
    very true, and thank you with the advise.
     

Share This Page

For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
UpGradeRC