For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My XP Digital DS1015

Discussion in 'Radios and Servos Section' started by mikey, Jun 21, 2012.

  1. mikey

    mikey Well-Known Member Factory Member

    Joined:
    May 31, 2012
    Messages:
    3,125
    Likes Received:
    296
    here's a pic of my DS1015, it turns the wheels of my buggy. I striped a Airtronics 358 servos gears out so I bought this one and turned the servo saver down...

    [​IMG]
    the specs are...
    Motor: Coreless

    Gear: Metal

    Case: Aluminum Heat Sink

    Dim. (LxWxH): 41.8x20.6x39.6mm

    Weight: 66gm./2.328ozs.

    Torque: @4.8v - 11.6kg./161.1oz-in @6.0v - 14.5kg/201.4oz-in

    Transit Time 60deg.: @4.8v - 0.138sec @6.0v - 0.108sec

    Voltage range: 4.8v-6.0v
     
  2. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    Got this servo too for my B4.1 great servo!!
     
    mikey likes this.
  3. AERacer

    AERacer Administrator Staff Member Moderator Factory Member

    Joined:
    May 30, 2012
    Messages:
    9,288
    Likes Received:
    2,028
    That's the servo I use in ALL my cars and trucks
     
    mikey likes this.
  4. mikey

    mikey Well-Known Member Factory Member

    Joined:
    May 31, 2012
    Messages:
    3,125
    Likes Received:
    296
    I'd like to have them in all my cars as well, the one in the buggy works excellent, they are cheaper than most but at around $100 I can't go and just buy several, I have to wait until I have the extra money to get the good servos. Until then I will be content with the Tower Pro 995...:D
     
  5. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    I was lucky to get this with my B4.1 :p
     
    mikey likes this.
  6. mikey

    mikey Well-Known Member Factory Member

    Joined:
    May 31, 2012
    Messages:
    3,125
    Likes Received:
    296
    well I hate to say it but I'm going to anyways, the Tower Pro servos I was using in my SC10GT went ballistic ! I don't know that there was anything I did because all I done was plug them up and set the end points on throttle and the steering. I don't believe I will endorse their servos any more. Unless where I changed receivers from FM to 2.4 GHZ but that shouldn't matter right ?
    Don't buy these servos or you will be disappointed especially if you race...
     
  7. AERacer

    AERacer Administrator Staff Member Moderator Factory Member

    Joined:
    May 30, 2012
    Messages:
    9,288
    Likes Received:
    2,028
    Electronics fail without warning... :) What's wrong with your servo?

    I remember issues with an aftermarket servo in a B4 RTR, throttle was stopping once and a while.....
     

Share This Page

For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
Pro-Line Racing