For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Convert your RC10T4 into a SC10

Discussion in 'RC10 T / T2 / T3 / T4.x / CT4.2 / T5M' started by AERacer, Jun 4, 2012.

  1. AERacer

    AERacer Administrator Staff Member Moderator Factory Member

    Joined:
    May 30, 2012
    Messages:
    9,356
    Likes Received:
    2,045
    Here is the complete parts list you’ll need to convert a RC10T4 to a SC10. All parts are from Team Associated

    4449 4-40X3/16 ALUM LOCKNUT
    6629 5-40 LOCKNUTS
    6913 4-40 X 1 1/4 SHCS
    6917 4-40 X 3/8 BHCS
    6924 4-40 X 3/8 SHCS
    6925 4-40X1/2 SHCS
    9805 SC10 KMC WHEEL SLVER, FR
    9806 SC10 KMC WHEEL SLVER, RR
    9809 SC10 TIRE W/FOAM INSERT
    9613 FRONT AXLE B4 (TRAILING)
    9814 BATT. STRAP AND HARDWARE
    9816 SC10 FRONT SKID, BUMPER
    9817 SC10 RR BUMPER AND BRACE
    9818 SC10 ARM MNT/CHAS PLATE
    9819 SC10 REAR MOTOR GUARD
    9820 SC10 BODY MOUNTS FR/RR
    9821 SC10 BODY POSTS FR/RR
    9822 SC10 NERF BARS
    9823 SC10 CHASSIS
    9825 FRNT SHOCK TOWER SC10/T4
    9826 TRANS CASE FOR GEAR DIFF.
    9827 SC10 COMPLETE GEAR DIFF.
    9832 10 X 16MM BEARING
    9833 SHCS 4-40 X 1 3/4 THIS IS NEW, YOU WILL HAVE TO PURCHASE
    9835 SHCS 5-40 X 3/4 THIS IS NEW, YOU WILL HAVE TO PURCHASE
    9836 SC10 CLEAR BODY
    89430 SC8 MUD FLAPS​
    ** YOU MIGHT HAVE MOST OF THE HARDWARE, IF NOT PART NUMBERS ARE INCLUDED!**
    PARTS NEEDED TO MAKE GEAR DIFF SC10
    9826 TRANS CASE FOR GEAR DIFF.
    9827 SC10 COMPLETE GEAR DIFF.
    9832 10 X 16MM BEARING
     
  2. tmail61

    tmail61 Well-Known Member Factory Member

    Joined:
    Jun 1, 2012
    Messages:
    4,446
    Likes Received:
    916
    The SC10RS battery strap #9879 is a better choice. :)

    Built my SC10 from a T4 FT. The only upgrades where the above battery strap and V2 slipper hubs, spring and washer.
     
  3. Mad-Max

    Mad-Max Member

    Joined:
    Jan 11, 2013
    Messages:
    21
    Likes Received:
    2
    Couldn,t you buy a new SC10 for what all those parts cost ??
     
  4. tmail61

    tmail61 Well-Known Member Factory Member

    Joined:
    Jun 1, 2012
    Messages:
    4,446
    Likes Received:
    916
    Depends on where you start from. Built mine from a T4 FT, already was racing SC so had the wheels and a body.

    To do this today I would get a roller off ebay or R/C Tech.
     
  5. Bubba Boggs

    Bubba Boggs Well-Known Member Factory Member

    Joined:
    Sep 25, 2012
    Messages:
    1,082
    Likes Received:
    280
    A number of those parts are already on a t4. front and rear towers are the same. Rear arm mount is the same. Basicly need bumpers, body mounts.chassis ,batery strap and foam. can use the same tranny and all hardware.
     

Share This Page

For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
Pro-Line Racing