For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Avid BB springs of Team Assocaited BB

Discussion in 'RC10 / B2 / B3 / B4.x / B5 / B5M / B6 / B6D' started by Cooper, Aug 15, 2012.

  1. Cooper

    Cooper Well-Known Member

    Joined:
    Jul 31, 2012
    Messages:
    226
    Likes Received:
    22
    So what would you recommend to me on getting first? I was leaning more towards just Avid Springs because they are cheaper but if you guys/gals are thinking the legit BB would be better I would most likely get them. Thanks for any replys.
     
  2. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    I'm just going to wait when the big bores come out..
     
  3. Cooper

    Cooper Well-Known Member

    Joined:
    Jul 31, 2012
    Messages:
    226
    Likes Received:
    22
    Well I think I am going to try the Losi springs for a while since I have store credit..

    All I need to run the TLR 22 springs is the following correct:
    TLR5095 - Team Losi Racing 12mm Shock End & Spring Cup Set (TLR 22)
    Then any 22 Buggy springs

    These are the springs I have for a high traction surface let me know what you think:
    TLR5172 - Team Losi Racing Front Shock Spring Set (2.5 Rate/Red) (TLR 22)
    TLR5166 - Team Losi Racing Rear Shock Spring Set (1.8 Rate/White) (TLR 22)
    TLR5167 - Team Losi Racing Rear Shock Spring Set (2.0 Rate/Yellow) (TLR 22)

    I'm hoping I will like this mod because it's so much cheaper then Avid springs.
     
  4. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    Saw this also on RCtech forum ;)
    Look for the same rate you are running now?
     
  5. Blake Lirette

    Blake Lirette Member

    Joined:
    Jul 2, 2012
    Messages:
    17
    Likes Received:
    0
    I e-mailed back and forth with David Joor of Avid and it is my impression that his springs will work with the AE big bore shocks. Remember that Kurt works for him now and I am sure he still has an inside look at what goes on.
     
  6. Martijn

    Martijn Well-Known Member

    Joined:
    Jun 4, 2012
    Messages:
    1,424
    Likes Received:
    214
    Yes ofc they will work with the BB shocks

    I don't know what I'm going to do.. I would like to try the Avid srpings but 50$ for springs is too much for me...
     

Share This Page

For only 9.99$/year you can upgrade your account to RCTen Factory Team Member. Click for all benefits.
UpGradeRC